Electrical Technician Course

Overview:

The Wasatch Trade Tech Electrical Technician program is a 150-clock-hour, online distance-education course that prepares learners for entry-level positions in residential and light-commercial electrical work. The curriculum addresses the National Electrical Code (NEC) at an awareness level, electrical theory and fundamentals, residential wiring methods, panels and distribution, motors and controls, low-voltage systems, and lighting.

Instruction is delivered by a Master Electrician with classroom and field experience, and is reinforced by embedded virtual reality skills labs that simulate field tasks — measuring voltage, amperage, and resistance; selecting wire gauges; wiring a circuit; and diagnosing electric water heater faults. Graduates are prepared to sit for the OSHA 10 Construction Industry, NFPA 70E Awareness, and ATC Electrical Fundamentals credentialing exams.

Learning Path (Total hours: 100 hours)

1. Introduction to the Electrical Trade (6 Hours)

Topics Covered (LMS lessons)

• Introduction to the Electrical Trade
• Ethical Work Practices & Customer Service
• Electrical Safety & Hazard Awareness

2. OSHA 10 — Construction Industry (10 Hours)

Topics Covered (LMS lessons)

• Introduction to OSHA
• Fall Hazards
• Avoiding Electrocution Hazards
• Struck-By Hazards
• Caught-In or -Between Hazards
• Personal Protective Equipment
• Health Hazards in Construction
• Excavations
• Materials Handling, Storage, Use, and Disposal
• Scaffolds
• Hand and Power Tools

• Safe Driving Practices
• Emergency Action Plans and Fire Protection
• Cranes
• Welding and Cutting
• Final Assessment

3. Tools, Meters, & Test Equipment (12 hours)

Topics Covered (LMS lessons)

• Hand Tools for Electrical Work
• Power Tools & Specialty Equipment
• Meters & Diagnostic Instruments

4. Electrical Theory and Fundamentals (20 Hours | Includes VR LAB)

Topics Covered (LMS lessons)

• Atoms, Electrons, & Electrical Flow
• Voltage, Current, and Resistance
• VR LAB · VR Lab: Measuring Voltage
• Ohm’s Law & Power Formulas
• Series, Parallel, & Combination Circuits
• AC vs DC: Waveforms, Frequency, & Phase
• VR LAB · VR Lab: Measuring Amperage
• VR LAB · VR Lab: Component Resistance

5. Wiring Methods & Materials (14 Hours | Includes VR LAB)

Topics Covered (LMS lessons)

• Wire Types, Sizes, & The AWG System
• VR LAB · VR Lab: Selecting Wire Gauges
• Conduit Types & Installation
• Cable Routing, Supports, and Protection
• Boxes, Fittings, and Connectors

6. Residential Wiring & NEC Essentials (22 hours | Includes VR LAB)

Topics Covered (LMS lessons)

• NEC Overview & How to Navigate the Codebook
• Branch Circuits & Load Calculations
• VR LAB · VR Lab: Wiring a Circuit
• Receptacle Layout & GFCI/AFCI Protection
• Lighting Circuits & Switch Configurations
• Service Entrance & Grounding/Bonding

7. Electrical Panels and Power Distribution (10 hours)

Topics Covered (LMS lessons)

• Panel Components & Circuit Breakers
• Single-Phase vs Three-Phase Power
• Transformers and Power Distribution

8. Motors, Controls, and Troubleshooting (14 hours)

Topics Covered (LMS lessons)

• Electric Motor Types and Applications
• Motor Starting & Protection
• Control Circuits & Relay Logic
• Systematic Troubleshooting Methods

9. Low Voltage & Communication Systems (8 hours)

Topics Covered (LMS lessons)

• Doorbell, Thermostat, and Security Systems
• Data / Communication Cabling Basics
• Smart Home & Building Automation Awareness

10. Lighting Systems (8 hours)

Topics Covered (LMS lessons)

• Lamp Types & Efficiency
• Fixture Installation and Troubleshooting
• Emergency & Exit Lighting

11. Career Readiness and Job Transition (6 hours)

Topics Covered (LMS lessons)

• Electrical Career Pathways
• Resume Writing
• Interviewing and First Day Success

12. ATC Certified Electrical Apprentice Prep (20 hours)

Topics Covered (LMS lessons)

• Electrical Safety
• NEC General Provisions (Articles 100 & 110)
• Branch Circuits (Article 210)
• Feeders and Services (Articles 215 & 230)

• Conductor Sizing & Overcurrent
• Grounding and Bonding (Article 250)
• Boxes, Raceways, and Wiring Methods
• Conduit Bending & Methods
• Electrical Calculations
• Practice Exam
• Final Assessment

Program Learning Outcomes:

Upon successful completion of this program, graduates will be able to:
Apply OSHA 10 Construction Industry and NFPA 70E Awareness safety practices to electrical work.
Identify electrical hand tools, power tools, test equipment, and PPE used in residential and light-commercial electrical work.
Apply Ohm's Law and basic electrical theory to series, parallel, and combination circuits.
Read and interpret electrical schematics, ladder diagrams, and residential blueprints.
Select appropriate wire gauges, conductors, and conduit for code-compliant installations.
Identify and apply key NEC requirements for residential wiring at an awareness level.
Install and terminate common residential wiring devices, including receptacles, switches, and lighting fixtures.
Identify electrical panels, breakers, and distribution components and explain their function.
Diagnose motor and motor-control faults using a systematic troubleshooting procedure.
Install and troubleshoot common low-voltage systems including doorbells, thermostats, and security devices
Demonstrate workplace readiness including resume writing, customer communication, and jobsite ethics.

Program Completion Time:

Admission Requirements:

Age: Must be at least 18 years old (17-year-olds can start the course but can only finish it once they turn 18).
Education: High School Diploma or GED
Residency: Proof of U.S. residency
Language: English proficiency
Prerequisites: Payment in full

Completion Requirements:

Student Supports:

Program Structure:

Program Cost:

What you will earn upon course completion?

Completing this course will help you:

Understand the principles and components of HVAC systems.
Gain hands-on experience with HVAC tools and equipment.
Develop problem-solving skills for HVAC system troubleshooting and repair.
Prepare for certification exams and increase your employability in the HVAC industry.

Who is the course for?

This program is designed for adult learners seeking entry-level competency. Applicants must meet the
following:

Minimum age 18 years
Reading and math fundamentals (fractions, decimals, basic algebra)
Technology requirements per Program Policies (device, internet, webcam, microphone)
Computer literacy and email proficiency
Physical capability to perform light tool work and field tasks (with or without reasonable accommodation)

A Great Return on Your Investment

AVERAGE TIME TO COMPLETE

• Wasatch Trade Tech – 9-12 weeks
• 4-Year University – 5.2 years
• 2-Year College – 3.4 years

AVERAGE TUITION AND FEES

• Wasatch Trade Tech – $7,999
• 4-Year University – $103,000
• 2-Year College – $39,000

EDUCATION COST + LOST INCOME

• Wasatch Trade Tech – $29,000
• 4-Year University – $261,120
• 2-Year College – $141,461

MEDIAN COMPENSATION

• Wasatch Trade Tech – $46,200
• 4-Year University – $47,000
• 2-Year College – $38,600

TIME TO RECOVER INVESTMENT

• Wasatch Trade Tech – 7.5 months
• 4-Year University – 4.7 years
• 2-Year College – 3.7 years

	Wasatch Trade Tech	Four-Year University	Two-Year College
AVERAGE TIME TO COMPLETE	9-12 weeks	5.2 Years	3.4 Years
AVERAGE TUITION AND FEES	$7,999	$103,000	$39,000
EDUCATION COST + LOST INCOME	$29,000	$261,120	$141,461
MEDIAN COMPENSATION (Based on full-time employment)	$46,200	$47,000	$38,600
TIME TO RECOVER INVESTMENT	7.5 months	4.7 Years	3.7 Years

Wasatch Trade Tech Advantage

The HVAC industry is booming, with the Bureau of Labor Statistics projecting a remarkable 15% job growth by 2026 – far outpacing many other professional fields. As buildings become more complex and environmental sustainability becomes critical, skilled HVAC technicians are now essential professionals.

Working as an HVAC technician means entering a dynamic field with continuous learning opportunities. You’re not just choosing a job – you’re stepping into a profession with purpose.

Wasatch Trade Tech equips you with industry-standard certifications crucial for HVAC success: NATE Ready-to-Work, EPA 608 Universal, and OSHA 10 safety certifications. Our comprehensive course goes beyond test preparation, providing a roadmap to professional success.

These certifications are your ticket to higher earning potential, professional credibility, and a competitive edge in the HVAC industry. You’ll gain the knowledge and confidence to not just pass exams, but truly understand HVAC technology and safety.

Your future starts here – certified, capable, and ready to succeed

Wasatch Trade Tech (WTT) reimagines professional training with an affordable, online HVAC certification course. Unlike traditional schools charging $25,000+ for nearly year-long programs, WTT offers a swift, cost-effective path into a high-demand field.

With critical technician shortages, you could even secure an apprenticeship during your training. Your HVAC career is now shorter, more accessible, and more dynamic than ever. Start now.

Scholarship Opportunities

Financial assistance and scholarship opportunities may be available for qualified candidates who demonstrate both merit and need. These opportunities are reviewed on a case-by-case basis, taking into consideration factors such as academic background, professional experience, financial circumstances, and commitment to the field/industry. Interested applicants are encouraged to contact our admissions office (801.834.4547) to discuss available options and submit the necessary documentation for scholarship consideration. While award amounts vary, our goal is to make quality technical education accessible to promising students who are dedicated to building a career in skilled trades.

FAQ

What makes Wasatch Trade Tech's HVAC course unique?

Our online HVAC course stands out by reimagining technical education for the modern learner. Unlike traditional trade schools that lock you into lengthy, expensive courses, we offer a revolutionary approach to professional training:

Rapid Certification Path

Complete your comprehensive HVAC certification in as little as 12 weeks
Learn entirely online, from the comfort of your home
Flexible schedule that works around your current job and life commitments

Unprecedented Affordability

Cost significantly less than traditional trade schools (often 30-40% lower tuition)
No hidden fees or additional expenses for commuting or physical materials
Highest return on educational investment in the technical training market

Comprehensive Curriculum

Fully interactive online modules covering all critical HVAC technical skills
Preparation for key industry certifications like NATE, EPA 608, and OSHA
Real-world problem-solving techniques taught through digital simulations and case studies

Our course isn’t just an education – it’s a fast-track to a professional HVAC career, designed for motivated individuals who want maximum skills with minimum time and financial investment.

What additional support or instruction is available if I need help understanding HVAC course material or concepts?

Our students have exclusive access to weekly live video sessions with Master HVAC Technician Tiff Singleton, who hosts an interactive Q&A once per week in the evening (Central Time). During these 60-minute sessions, Tiff addresses student questions about course material, technical concepts, and shares valuable industry insights drawn from years of field experience and teaching thousands of HVAC students.

Attendance on these calls is not mandatory but is highly recommended for those students who are in the first few weeks of starting their program.